Lab Scale And Formulation Equipments

Product Details:

This vibrating energy screen is unit consisting of circular pretension screen mounted on the frame along with vibrating motor. The vibrating motor imparts three plane vibrations to the screen due to revolving eccentric weight. Total assembly is mounted on suitable springs so that it becomes an independent body which vibrates without parting any vibrations to the foundations.

• High capacity & optimum use of space.
• Process adaptability
• Low operating and maintenance cost.
• Long screen life.
• Easy for assembly & dis.-assembly for cleaning & change over of screens.
• Springs amplify the vibrations leading to reduced motor HP, maintenance & operational cost.
• Compact unit for easy of operations.
• Available in two, three & four deck also.

Product Details:

The “CHITRA” Lab Press II Model is a Table Top model which is the best suitable solution for Laboratory / R&D purpose and for small batch production. The Machine is available with latest advanced features to compatible with cGMP norms and meeting varied customer requirement.

The Machine is available with a very compact design and is allow the flexibility in operation due to various configurations available.

Availability:

• Lab Press II 8D – 8 Station ‘D’ Tooling
• Lab Press II 10B – 10 Station ‘B’ Tooling
• Lab Press II 12 MT – Multi Tooling Model
• Lab Press II with Monitoring System
• Lab Press II with Compaction Force Measuring / Sense Force System
• Simple design requires minimum maintenance.

Product Details:

We are the leading name in the market engaged in offering a wide assortment of Mini Fluid Bed Dryer, which is used for granulation or agglomeration, layering, and coating for various sizes of particles. In addition to this, this is used for drying granules, crystalline, coarse or similar materials in pharmaceuticals and fine chemicals.

Features:

• A.C. Frequency drive for blower motor to control the air flow
• Silicon gaskets
• Blower motor non-flameproof
• Pneumatic system for finger bag shaking

Specifcations:

• Gross Volume of Product Container : 05 Litres
• Working Capacity of Product Container : 03 Litre
• Working Capacity of Drying : 01 to 1.5 Kg. (@ BD of 0.5 Gms/cc)
• Blower motor HP : 01 HP
• Heating load in KW : 03 Kw
• Machine Size : 1500 mm (L) x 850 mm (D) x 2150 mm (Ht.)

Product Details:

We are providing a qualitative range of Mini Rapid Mixer Granulator. This is designed for excellent mixing and consistent granules with higher productivity. In addition to this, this granulator is equipped with advanced features with meeting the CGMP compliance requirement.

Features:

• Ease of use
• Long service life
• Attractive function
• Precision-designed

Technical Specifcations:

Product Details:

The R & D model blender have one common drive with facility of mounting & quick change over of all above mentioned attachments of various types & capacity of blenders.

The all types of BLENDER are an efficient and versatile blending machine for mixing and lubrication process of dry powders homogeneously. Approximate two third of the volume of the Blender is filled to ensure proper mixing.

In all types of blenders the powders / granules comes from all sides due to the shape of the product container. The rpm can be select as per the product requirement.

The material gets sufficient continuous movement due to the shape of container. Due to facility of change in rpm and various type of blender the material gets good quality of blending/lubrication of powder / granules

Features:

• Suitable for R & D of dry mixing of products in powder & granules
• T/C ended joint for easy changeover of cones.
• Same Drive is suitable for all type of Double Cone / Octagonal / ‘V’ Cone / Bin Type cone with capacity of 02 to 25 Litres. This concept & design save space, connected power & cost.
• Easy for loading and unloading & Cleaning
• All contact parts are made out of SS316 quality material.
• Simple design requires minimum maintenance.
• General structure & safety guards also made out of SS304 & polished to the matt finish in GMP Model.
• The different shape gives sufficient continuous movement to the granules & powder, result in good quality.
• Maximum care has been taken to ensure safe operation of the unit.
• Mini PLC for Time Setting and RPM Display
• A.C. frequency drive for variable speed of cone.
• Castor wheels mounted unit for easy movement of machine.
• Inching facility in both direction (forward & reverse) for easy loading & unloading with charging container.
• Safety railing with interlocking, in front of the machine.
• One sliding tray made out of SS304 at structure, to put the utensils used for small volume handling & also to put the extra cones of blender.

Product Details:

The CHITRA Multi – Purpose Laboratory System are best suitable and ideal for R&D and for Small Batch Production in Pharmaceuticals / Chemical / Cosmetic & food Industries.

Due to its versatility and uniqueness, more useful for pharma colleges / university / Laboratory Application.

The Multiple attachments are mounted on Main Drive Unit and are easily interchangeable for various operations like

• Dosing
• Coating
• Mixing
• Grinding
• Stirring
• Kneading
• Granulating
• Filling
• Homogenising
• Pelletizing
• Sieving
• Shaking

Main Drive Unit CMD

The Main Drive Unit CMD, which is completely maintenance free, has 1 HP 0.75 KW, three phase AC motor. The motor rpm can be controlled with AC variable drive to adjust the speed sleeplessly from 10 to 400 rpm. The process time is auto controlled through timer relays. A Digital Dial regulates the Speed.

The sturdy ball bearing worm gear drive is completely maintenance-free and provides an output torque of max 23 Nm. The various attachments can be easily and quickly connected by means of a coupling.

The various attachments can be quickly attached & interchanged to the main drive unit. A separate power supply socket is also provided for the attachments requiring heating.

Technical Specification – Main Drive Unit  

• Model : Main Drive Unit CMD

• Input Power : 230 V / Single Phase

• Motor Type : Three Phase AC Motor

• Motor RPM : 10 – 400 RPM (Adjustable with AC Drive)

• Gear Type : Worm Reduction Gear

• Initial Torque : Robust for Heavy Use (Maximum 23 Nm)

• RPM Display : On Control Panel

• Timer : 0-999 Minutes Adjustment

• Electric Motor : 1 HP AC / 230V / 50HZ, 2800 RPM

• AC Variable Drive : 1HP, 230V AC 1P (Input) – 3P (Output)/ 50 HZ

• Dimension in MM : 450mm x 400mm x 440mm

• Net Weight : 40 Kg.

Universal Gear UG (For Angle Adjustment & Speed Variation)

The Universal Gear is required for adjusting the operating angle & for the speed reduction of various attachments. The gear allows infinitely variable adjustment of angle of operation from (0 to 60) degrees and for speed reduction (1:6)

The Gear required for the Operation of below Multi Purpose attachments: 

• • The Polishing Drum is designed for polishing of Coated Tablets. The drum is covered with interchangeable felt parts. The cover is fitted with Acrylic sheet window for observation of the polishing process and addition of the polishing agent during the production process.

• • •  

   

   

   

  The Coating pans are used for coating Tablets. Coating Pan can be mounted on Main Drive unit via Universal Gearing UG Device. Which permits Coating pan to be held at any angle up to 45 with reduction in speed? The Suitable Spray Gun is provided for Spraying of the material. For drying the coated-tablets an infrared drying attachment with adjustable height is provided. The maximum operational capacity is 30% of coating pan volume.

We are a renowned and customer centric firm, which is engaged in delivering a comprehensive range of Lab Tablet Coating System. These are used for coating of tablets. Apart from this, these are designed after a careful study of the needs of expert coaters such as rotational speed, efficient AHU system, and efficient solution spraying system.

Features:

• RPM Indication facility
• FLP Lamp
• Tablet Discharge Spout
• Pan Drive Motor flameproof

Specifications:

We are offering a wide range of Conventional Coating Machine to our respected clients. Our offered products are used for coating the surfaces. These machines have a general structure which is made out of M.S. and covered with SS304 material & polished to the matt finished, the anti-vibrating unit provided with m/c and RPM indication facility.

Features:

• Longer service life
• Resistance against damage
• Sturdy construction
• Easy to use

The “CHITRA” Lab Cap II is an Automatic Bench Top Capsule Filling Machine for Powder & Pellet Filling with Provision to fill the Tablet & Liquid into Hard Gelatin Capsules. The Machine has been designed to fill the Hard Gelatin Capsule working on Tamping Pin Principle is equipped with PLC Controls and its design confirms to cGMP requirement.

The Machine is very compact in Size & Design, which makes it easy to install and it is operator friendly. The Working Cycle is completely Automatic and is controlled with the PLC operated Control Panel.

Features:

Most Suitable Machine for R&D Laboratory / Formulation Development / Process Development Labs / Small Batch Production for Trial Purpose / Pharmacy University
Machine is apt for Powder Filling & Pellet Filling
Availability and feasibility with Capsule Size – ‘0 EL to 5′ Size Change Part
Maximum output of 1500 / 3000 Capsules / Hour
Auto Rejection of Unopened Capsule
Tamping Pin Principle
PLC Based MMI control Panel
Change Size Operation requires less than 30 Minutes. No tools required.
Inbuilt Vacuum Pump for Capsule Separation
Confirms to cGMP requirement
Interlock System at Upper Guard for Operator Safety
Validation Documents



Optional Features:

• Partial Filling Attachment for Micro Dose
• Liquid Filling attachment
• Tablet Feeding System with Change Part
• Dust Collector System

CHITRA, Multi Mill is a self contained portable unit useful for high speed GRANULATING of a wide range of wet and dry materials without special attachments.

As compared to the four common principles of size reduction i.e. grinding, compression, impact and shearing, which often do not produce controlled size reduction, this machine utilizes the principle of variable force swing hammer blades having both knife and impact edges rotating with a carefully selected screen to control size reduction.

Flow path of material in vertical rotor machine is streamlined. During comminuting, material entering the chamber travels to the periphery and passes through the screen tangentially and redial, avoiding chocking and temperature rise.

Features:

• Suitable for dry and wet granules.
• All contact parts are made out of SS316 quality material.
• Castor provided for the ease of mobility.
• Sieves available in sizes of 0.5 to 12mm hole dia.
• Beaters with knife edges & impact edges & scrapper blades.
• In GMP Model complete body claded with SS304 and polished to the matt finish.
• Machine rated for continuous operation.
• Higher output with process uniformity.
• All contact parts can easily be dismantled and cleaned for change of product.
• Wide range of SS perforated screens available.
• Machine portable on castor wheels.
• Direction of blade rotation reversible.
• Different size of screen / speed / number of blade / direction of rotation of blade can be selected.
• VFD for variable speed of rotor.
• Different size of sieves are available for easy of R & D work.

CHITRA’s Fluid Bed Multi Technology, Model FBMT for R&D / Laboratory application with Formulation Development

The basic machine is with two different processing insert -

Top Spray Processor / Dryer Insert
Wurster Insert (Bottom Spray Pellet Coating)

“Chitra” Fluid Bed Multi Technology provides processing flexibility for the production of granules and coating of powders and pellets.

Top spray for granulation and drying & Wurster for particle coating & pallet coating.

Features:

• 2 bar sock resistance construction.
• All contact parts made out of SS316 with cGMP Construction
• Motor for blower & peristaltic pumps are flameproof.
• All SS parts inside the production room shall be @ mirror finish.
• Solid flow monitoring system at exhaust air line.
• Inlet Air, Outlet Air & Product Bed Temperature Sensors.
• Differential pressure trans-meter for HEPA filter, filter bag and product container bottom sieve, with PLC interface facility.
• A.C. Frequency Drive for both motors.
• Sampling port at product container.
• Quick opening system for container sieve for top spray.
• WIP port and nozzles.
• Mitsubishi / Siemens / Backhof make PLC & Frequency drive and Beijer / Siemens / UniOp / Backhof make color touch screen for automated process controls.
• Wash water drain port with valve at inlet plenum.
• All rubber gaskets of silicon.
• All light and sight glass and air duct will be with T/C clamp facility.
• Pneumatic inflatable gaskets at bottom and top of the product container and also for air discharge bag sealing.
• cGMP construction
• Dew point transmitter at AHU for Rh.