Capsulation Section Machines

We are providing a large assortment of Double Cone Blender. These offered products are used for mixing dry powder and granules homogeneously. Also, it can be used for pharmaceutical, food, chemical and cosmetic products. Apart from this, clients can buy these blenders from us at the pocket-friendly price within the promised frame of time.

Features:

• The conical shape at both ends
• Maximum care has been taken to ensure safe operation of the unit
• Worm reduction gear use for speed reduction
• Food grade rubber gasket

By understanding the varied needs of our valued patrons, we are presenting a quality approved spectrum of V Blender in the market. The offered products have high reliability, efficiency, performance and long service life. These products are used for mixing and lubrication process of dry powders homogeneously in the food industry.

Features:

• Easy for loading and unloading
• Easy for cleaning
• PLC Based MMI Control Panel
• VFD for variable speed of cone

Keeping in mind ever-evolving requirements of our esteemed clients, we are providing a broad range of Octagonal Blender. This blender is manufactured using quality approved components and ultra-modern technology under the guidance of our adroit professionals at our well-furnished manufacturing unit.

Application:

Used in mixing of granules.

Operation:

The OCTAGONAL BLENDER is an efficient and versatile blending machine for mixing and lubrication process of dry granules homogeneously. Two third of the volume of the Cone Blender is filled to ensure proper mixing. The Octagonal Blender gives best result for granules due to very slow speed and octagon shape of container. It can be used for Pharmaceutical, Food, Chemical and Cosmetic products etc./p>

In Octagonal Blender the granules comes from all sides due to the octagonal shape of the product container, hence requirement of RPM is less. Suitable mainly for Crystalline & Granular type material. This type of material gets sufficient continuous movement due to their shape if container has only slow movement and will results in good quality of blending / lubrication of granules.

Salient Features:

• Suitable for dry mixing of products in granule form.
• Easy for loading and unloading of material.
• Easy for cleaning.
• All contact parts are made out of SS 316 or SS 316 L quality materials, as per customer requirement.
• The octagonal shape & slow speed of rotating gives sufficient continuous movement to the granules result in good quality.
• Simple design requires minimum maintenance.
• General structure & safety guards made out of mild steel & colored in Standard Model and made out of SS 304 & polished to the matt finish in GMP Model.
• Maximum care has been taken to ensure safe operation of the unit.
• PLC and Color Touch Screen Control. (Optional feature)
• Manual rotating facility with hand wheel for inching.
• Bigger size batch at low power consumption.

Optional Features:

• PLC Based MMI Control Panel
• VFD for variable speed of cone.
• Flame proof drive motor along with flame proof starter.
• Vacuum loading facility for material charging.
• Intensifier Bar with VFD Drive

Backed by skilled and experienced engineering expertise, we are engaged in offering a wide collection of Bin Blender to our valued clients. Manufactured using the best quality components, these are the efficient and versatile machine for mixing dry powder and granules homogeneously.

Features:

• Sensor checking lock system before machine start.
• Safety Bar to cover moving part.
• Rotation of tank in vertical.
• Variable Speed of rotation by VFD.

We hold expertise in offering our clients Conta Blender. The offered blender is well-known for its features like excellent finish, high strength, dimensional accuracy and robust construction. The offered Blender is designed and manufactured by our professionals with the help of advanced technology using optimum quality raw materials as per the industry standards. Further, the offered Blender is available in different specifications as per the requirements.

Description:

CHITRA Semi Automatic Capsule Filling Machine has been designed to fill the Hard Gelatine Capsule with variety of Powder / Pellets. The Machine is compact in Design and Operator Friendly.

Salient Features:

• Automatic Declutching of Loader when loading rings are full. Minimizes operator attention and ensures maximum production
• Infinitely variable filling Table-Speed, ensures closage accuracy
• The Machine is ideally suited for Pharmaceuticals & Neutraceuticals application
• It is robust in design and easy to operate
• The fast changeover from One Change part to another change part
• The Machine requires the little maintenance
• Automatic Drug hopper in feed mechanism eliminates weight variation, reduces operator fatigue and enhances productivity
• A choice of four auger speeds enables the machines to handle a wide variety of powders from highly hygroscopic to the very free – flowing
• Improved design of the drug hopper drive ensures unloading of powder and quick dismantling of hopper for cleaning and eliminates any possibilities of contamination of the product with traces of oil or metal
• Automatic capsule closing system ensures faster and safer closing and ejection of filled capsules
• Each row of 10 Holes on Loading Ring
• Aluminium Alloy loading Ring
• Special light magnesium alloy provided which facilitate easy handling

Specifications:

body,div,table,thead,tbody,tfoot,tr,th,td,p { font-family:"Liberation Sans"; font-size:x-small }

Description:

The Empty Capsule Sorter Elevator is used to sort the empty capsule for any damages and then elevate the good capsule from lower level to the higher level. The Empty Capsule Sorter Elevator is a part of the transfer line for the transfer for empty capsule in to the capsule hopper of the Automatic capsule Filling Machine, which is at higher level.

The machine works on the principle of vibratory sorting and lifting the capsules by airflow. A liner vibrator the drilled plate, which sorts the capsule as per the requirement. A continuous stream of air at a high velocity lifts the capsule up as soon as they are fed into the blower inlet chute after sorting them properly. The capsules are fed at a lower level and machine conveys them to a higher level.

Connected Load:

• Main Machine : 0.5HP/220 V/3 Ph/60 cycles

Utility Requirement:

• Vacuum : 80 mm of Hg
• Extra Change parts for additional size of Capsule.

Description:

CHITRA Automatic Capsule Filling Machine CCF Model has been designed to fill the Hard Gelatine Capsule with variety of Powder / Pellets / Tablets. The Machine is compact in Design and Operator Friendly. The Machine is equipped with Automatic PLC Based MMI Control Panel.


Technical Specifications:

Description:

Unfilled Capsule Separator for separating unfilled capsules from the filled capsules with centrifuge type air blowing system.

The machine works on the principle of airflow force. When this force is applied on the capsules, filled capsules will fall straight towards the down level, since they are slightly heavy in weight with respect to the empty or unfilled or half filled capsules The operator can adjust the air flow with the help of dimmer stat provided on the panel.

The airflow required for sorting the capsules is developed with the help of a rotating impeller. The free air is sucked in and discharged at a higher velocity by the rotating impeller, in the vertical pipe. He filled capsules are fed in the in feed chute in the top funnel shaped bowl and the filled capsules travel against the air pressure due to the gravitational force. All the filled capsules are collected and passed out of the machine from the lower level. Empty capsules are diverted to the outlet chute at slightly lower level than the inlet level but higher than the filled capsule outlet.

Connected Load:

• Main Machine : 0.35HP/220 V/3 Ph/60 cycles

Description:

Pharma Metal Detector is an eddy current based Digital metal Detection System designed for Pharmaceutical Industry for detecting Metal contamination in Tablets / capsules. The System is designed and manufactured to meet the stringent requirement and hygienic standards of pharmaceuticals industry.

Pharma Metal Detector Unit Consists of:

• Electronic Unit
• Test Coil
• Rejection Mechanism
• Stand

Features:

• Machine is having a Precise, Fast and easy set up of controls.
• Set parameter Data Retention on loss of power.
• 100 Product Memories.
• Security level provided to ensure settings are not tampered.
• Diagnostics available on LCD Display.
• Fail safe Mechanism
• Auto Validation Prompt
• Reject Time Stamping
• Gun Strut for Height Adjustment
• Castor Wheel for Movement
• Adjustment for Changing the angle of Test Coil
• Electronic Operated Flap Mechanism for Rejection
• Sensitivity: 0.15 mm Diameter Ferrous, 0.2. mm Diameter non Ferrous, 0.3 mm Diameter Ss Metal Particle for Testing
• Utility Requirement : 220V / 50 HZ / 200 VA

This is the most widely used Manually Operated Hard Gelatin Capsule Filling Machine is the most widely used machine of its kind in the pharmaceutical / Neutraceuticals Industries. This machine is small & Reliable for Small Units.

The Manual Capsule Filling Machine is one of the oldest as well as the most widely used form of capsule filling. The machine is designed and Manufactured with utmost care to handle all sizes ranging from 00 to 5 and to give you trouble free services year after year.

The manual capsule filling machine is widely used in research laboratories, academic institution and medium to small scale manufacturing industries.

Salient Features:

 

· All Contact parts are made of SS 316 Quality Material

· Machine is available with 300 Holes for filling

· Very Simple Design and Easy to operate

· Requires little maintenance and each availability of Spare parts

· Robust Construction ensure long life and trouble free machine operation

· Easy to clean

· Precision Manufacturing Technique ensures inter changeability of Size parts and spares

· Capacity Upto 3000 to 6000 Capsules / Hour (Depending Upon Change Part Size)

· Adaptable to all Capsule Size – ‘00’ to ‘5’ Size

Technical Specification

 

 

Catering to the requirements of Pharmaceutical industry, we bring forth the technically advanced Capsule & Tablet Sorting Machine. The Capsule & Tablet Sorting Machine is quite suitable to sort out different capsules and tablets. In addition, our Capsule & Tablet Sorting Machine is widely acclaimed for its high functionality and dependability as well. Further, owing to its unbeatable features, we have enlisted ourselves amongst the most renowned Capsule & Tablet Sorting Machine Manufacturers

Salient Feature:

• Provided with stainless steel S.S 316 contact parts
• Blower fan is dynamically balanced.
• Machine in fitted with the castor wheels for easy mobility.
• Overcome dust hazards as well as cross contamination at tablet compression and at Capsule Filling Machine
• All inlet manifolds and dust collection trays are of SS 304

Technical Specification: